LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2003 >> Marauder >> Repair and Diagnosis >> External Pages >> Different car >> Section 457 (Warning System) >> Removal And Installation >> Key-In-Ignition Warning Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2004 Mercury Marauder, 2004 Mercury Grand Marquis, and 2004 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ignition switch lock cylinder. For additional information, refer to STEERING COLUMN .
  2. Remove the key-in-ignition warning switch.
    1. Release the clip.
    2. Push the key-in-ignition warning switch off the rear of the ignition switch lock cylinder.
    Fig 1: Removing Key-In-Ignition Warning Switch
    G02755415Courtesy of FORD MOTOR CO.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals