LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2003 >> Marauder >> Repair and Diagnosis >> External Pages >> Different car >> Section 447 (Cruise Control System) >> Removal And Installation >> Speed Control Deactivator Switch >> Installation

Speed Control Deactivator Switch: Installation

WARNING: This page is about a different car, the 2004 Mercury Marauder, 2004 Mercury Grand Marquis, and 2004 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fully apply the brake pedal.
  2. Install the speed control deactivator switch.
    1. Position the speed control deactivator switch in the bracket and rotate clockwise.
    2. Connect the electrical connector.
    Fig 1: Connecting Electrical Connector
    G02758350Courtesy of FORD MOTOR CO.
  3. Insert a 1 mm (0.04 in) feeler gauge between the brake pedal actuation surface and the deactivator switch plunger.
  4. Slowly release the brake pedal.
scientia non olet · About LEMON Manuals