LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2002 >> Villager Base >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Linkage >> Removal And Installation >> Boot >> Installation

Removal And Installation: Boot: Installation

    NOTE: Lubricate the rack gear teeth with Steering Gear Grease C2AZ-19578-A or equivalent meeting Ford specifications ESW-M1C87-A.
    NOTE: Check that the front suspension steering ball stud dust seal is positioned correctly over the steering gear housing bead at the large inside diameter (ID) and is in the front wheel spindle tie rod groove at the small ID
    NOTE: Check that the front suspension steering ball stud dust seal is not twisted and the breather tube is securely inserted into the breather nipple at both front suspension steering ball stud dust seals
    NOTE: Apply Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A or equivalent meeting Ford specification ESE-M1C171-A to the front wheel spindle tie rod threads.
  1. To install reverse the removal procedure.
scientia non olet · About LEMON Manuals