LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2002 >> Villager Base >> Repair and Diagnosis >> Steering >> Manual Steering >> Steering Linkage >> Removal And Installation >> Boot >> Removal

Removal And Installation: Boot: Removal

  1. Remove the tie rod end (3A130); refer to TIE ROD END .
  2. Remove the tie rod end jam nut.
  3. Remove front suspension steering ball stud dust seal.
    1. Remove the inner and outer steering ball stud dust seal clamps.
    2. Remove the steering ball stud dust seal.
      Fig 1: Removing Front Suspension Steering Ball Stud Dust Seal
      G03411127Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals