LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2002 >> Villager Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Module >> Removal And Installation >> Module - Driver Seat (DSM) >> Removal

Module - Driver Seat (DSM): Removal

    CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damages may result.
  1. Disconnect the battery ground cable.
  2. Remove the outboard front bucket seat riser trim panel.
    1. Remove the four pin-type connectors.
    2. Remove the seat riser trim cover.
      Fig 1: Removing Outboard Front Bucket Seat Riser Trim Panel
      G03413128Courtesy of FORD MOTOR CO.
  3. Remove the driver seat module (DSM) bracket rear screw.
    Fig 2: Identifying Driver Seat Module (DSM) Bracket Rear Screw
    G03413129Courtesy of FORD MOTOR CO.
  4. Remove the DSM bracket side screw.
    Fig 3: Identifying DSM Bracket Side Screw
    G03413130Courtesy of FORD MOTOR CO.
  5. Remove the DSM.
    1. Disconnect the electrical connectors.
    2. Remove the DSM.
      Fig 4: Removing DSM
      G03413131Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals