Passenger's Window/Door Lock Switch

WARNING: This page is about a different car, the 2002 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Remove passenger's window/door lock switch. See WINDOW/DOOR LOCK SWITCH under REMOVAL & INSTALLATION. Check continuity between appropriate switch terminals with switch in appropriate position. See PASSENGER'S WINDOW/DOOR LOCK SWITCH TESTING table. See Fig 1. If continuity is not as specified, replace passenger's window/door lock switch.

PASSENGER'S WINDOW/DOOR LOCK SWITCH TESTING

Switch Position

⁽¹⁾ Continuity Between Terminals No.

Window

Down

6 & 8; 7 & 10

Neutral

6 & 9; 7 & 10

6 & 9; 8 & 10

Door Lock

Lock

2 & 3; 4 & 5

Neutral

⁽²⁾

Unlock

1 & 2; 3 & 4

⁽¹⁾	Continuity should never exist between terminals No. 7 and 8 or between terminals No. 8 and 9.

⁽²⁾	With door lock switches at rest, continuity should not exist between terminals No. 2 and 3 or between terminals No. 3 and 4.

Fig 1: Identifying Passenger's Window/Door Lock Switch Terminals

Courtesy of FORD MOTOR CO.