Output State Control (OSC) Procedures

Carry out visual inspection and vehicle preparation as required.
Select "Vehicle and Engine Selection" menu.
Select appropriate vehicle and engine.
Select "Diagnostic Data Link."
Select "Powertrain Control Module."
Select "Output Test Mode."
Select "KOEO On-Demand Self Test and KOER On-Demand Self Tests."
Carry out test and record DTCs.
Repair all NON-Transmission DTCs.
Repair all digital TR Sensor DTCs.
Repair all vehicle speed DTCs.
Make sure that the vehicle speed sensor and digital TR sensors are functional.
Select "Active Command Modes."
Select "Trans - Bench Mode or Trans - Drive Mode."