Anti-Lock Control - Traction Control DTCS

NOTE: Traction control system controls wheel spin by communication between the Anti-Lock Control (ABS) module and the Powertrain Control Module (PCM).

ABS CONTROL MODULE DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC	Description	Source	Action
B1318	Battery Voltage Low	ABS/TC	C
B1342	ABS Control Module Internal Failure	ABS/TC	Clear the DTCs. Repeat the self-Test. If DTC B1342 is retrieved again, Install a New Hydraulic Control Unit (HCU). Repeat the Self-Test.
B1484	Brake Pedal Input open Circuit	ABS/TC	D
B1596	Repair Continuous Codes	ABS/TC	REPAIR DTCs Retrieved.
C1095	ABS Hydraulic Pump Motor Circuit Failure	ABS/TC	E
C1145	RF Wheel Speed Sensor Input Circuit Failure	ABS/TC	F
C1155	LF Wheel Speed Sensor Input Circuit Failure	ABS/TC	F
C1165	RR Wheel Speed Sensor Input Circuit Failure	ABS/TC	F
C1175	LR Wheel Speed Sensor Input Circuit Failure	ABS/TC	F
C1222	Wheel Speed Signal Mismatch	ABS/TC	G
C1233	LF Wheel Speed Input Signal Missing	ABS/TC	H
C1234	RF Wheel Speed Input Signal Missing	ABS/TC	H
C1235	RR Wheel Speed Input Signal Missing	ABS/TC	H
C1236	LR Wheel Speed Input Signal Missing	ABS/TC	H
C1266	ABS Valve Power Relay Circuit Failure	ABS/TC	Install a New Hydraulic Control Unit (HCU). Repeat the Self-Test.
U1009	SCP Invalid or Missing Data for Engine Torque	PCM	Perform the PCM Self-Test.
U1027	SCP Invalid or Missing Data for Engine RPM	PCM	Perform the PCM Self-Test.
U1262	SCP Communication Bus Fault	SCP Network	Refer to MODULE COMMUNICATIONS NETWORK .