LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2001 >> Villager Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> System Tests (Evaporative Emission) >> EVAP Emissions System Leak Test

EVAP Emissions System Leak Test

NOTE: DO NOT pressurize EVAP canister to greater than 1 psi (6.8 kPa) or damage to canister may occur.

Connect Evaporative Emissions System Leak Tester (134-00056) to EVAP test port. Turn ignition on. Using scan tool, configure vehicle year and model. Access Active Command mode and select EVAP CLOSE SYSTEM on scan tool. Using leak tester, check EVAP system for leakage. Follow leak tester manufacturer's instructions.

scientia non olet · About LEMON Manuals