Power Mirror Adjust Switch
Disconnect power mirror adjust switch harness connector (remove power mirror adjust switch if necessary). Check continuity between appropriate power mirror adjust switch terminals (component side) while operating switch in specified positions. See POWER MIRROR ADJUST SWITCH CONTINUITY table. See Fig 1 . If continuity is not as specified, replace power mirror adjust switch.
POWER MIRROR ADJUST SWITCH CONTINUITY
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Driver's Side Power Mirror | ||
| Down | 2 & 6; 3 & 4 | |
| Left | 3 & 4; 5 & 6 | |
| Up | 2 & 4; 3 & 6 | |
| Right | 3 & 6; 4 & 5 | |
| Passenger's Side Power Mirror | ||
| Down | 1 & 6; 3 & 4 | |
| Left | 3 & 4; 6 & 7 | |
| Up | 1 & 4; 3 & 6 | |
| Right | 3 & 6; 4 & 7 | |