Torque Converter End Play Check: Check

Insert the special tools in the turbine.

Fig 1: Inserting Special Tools In Turbine
Tighten the center collect of the tool.

NOTE: The special tool must be between the ridges of the torque converter.

Fig 2: Positioning Indicator Bottom On Converter Housing

Attach dial indicator with bracketry to the tool. Position the indicator bottom on the converter housing and set the dial face at zero.
Pull up on the special tool (T80L-7902-A) and observe the dial indicator reading.

Fig 3: Checking For End Play In Excess Of 1.27 mm
If the end play exceeds specification, install a new torque converter.