LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2001 >> Cougar Base, 2.5 L, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Disassembly And Assembly Of Subassemblies >> Chain Sprockets >> Assembly

Chain Sprockets: Assembly

  1. Position the No. 16 reverse/overdrive ring gear bearing on the special tools.
    • Position the bearing with the part number facing towards the handle of the special tool.
    Fig 1: Positioning No. 16 Reverse/Overdrive Ring Gear Bearing On Special Tools
    G02164541
    2. NOTE: The identification stamping of the bearing goes to the outboard side of the reverse/overdrive ring gear.
    Fig 2: Installing No. 16 Reverse/Overdrive Ring Gear Bearing
    G02164542
  2. Using the special tools, install the No. 16 reverse/overdrive ring gear bearing.
  3. Position the No. 17 stator support bearing on the special tools.
    • Position the bearing with the part number facing towards the handle of the special tool.
    Fig 3: Positioning No. 17 Stator Support Bearing On Special Tools
    G02164543
    4. NOTE: The identification stamping of the bearing goes to the outboard side of the reverse/overdrive ring gear.
    Fig 4: Installing No. 17 Stator Support Bearing Into Stator Support Sprocket
    G02164544
  4. Using the special tools, install the No. 17 stator support bearing into the stator support sprocket.
scientia non olet · About LEMON Manuals