Seat Assembly

CAUTION: Disconnect negative battery cable, and wait one minute, before disconnecting any supplement restraint system electrical connectors. Failure to follow this procedure may increase possibility of accidentally deploying air bag(s), and cause personal injury.

Disconnect negative battery cable, and wait one minute. Remove both covers and retaining screws for rear seat track. Remove 2 retaining bolts securing seat track. Move seat fully rearwards. Remove 2 retaining bolts securing seat track. Disconnect electrical connectors, and remove seat. To install, reverse removal procedures. Tighten all retaining bolts to 28 ft. lbs. (38 N.m).