Output Shaft Speed (OSS) Sensor: Installation

WARNING: This page is about a different car, the 2002 Mercury Cougar. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Apply a light coat of petroleum jelly to the O-ring before installation.

Install the OSS sensor.
- Connect the OSS sensor electrical connector.
  
  Fig 1: Connecting OSS Sensor Electrical Connector
  Courtesy of FORD MOTOR CO.
Lower vehicle.
Check the transmission fluid level, add automatic transmission fluid.

Fig 2: Checking Transmission Fluid Level
Courtesy of FORD MOTOR CO.
Start the engine and move the transaxle range selector lever through all gear positions.

Fig 3: Identifying Transaxle Range Selector Lever
Courtesy of FORD MOTOR CO.