LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2000 >> Cougar 2.5 L, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 433 (Automatic Transaxle/Transmission) >> Disassembly And Assembly Of Subassemblies >> Low One-Way Clutch Assembly >> Assembly

Low One-Way Clutch Assembly: Assembly

WARNING: This page is about a different car, the 2002 Mercury Cougar. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Outer tabs of the roller assembly must face up.
    Fig 1: Installing Roller Assembly Into Outer Race With Groove Facing Up
    G02198581Courtesy of FORD MOTOR CO.
  1. Install the roller assembly into the outer race with the groove facing up.
    2. NOTE: To aid in inner race installation, rotate the inner race clockwise during installation.
    Fig 2: Installing Inner Race With Grooves Facing Up
    G02198582Courtesy of FORD MOTOR CO.
  2. Install the inner race with the grooves facing up.
  3. Check the operation of the one-way clutch as follows:
    1. Hold the outer race.
    2. Rotate the inner race clockwise. It should rotate with a slight drag without attempting to rotate the outer race.
    3. Rotate the inner race counterclockwise. The inner race should rotate the outer race.
      Fig 3: Checking Operation Of One-Way Clutch
      G02198583Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals