LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2000 >> Cougar 2.5 L, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Crankshaft Position (CKP) Sensor >> Removal & Installation (All Others)

Removal & Installation (All Others)

  1. CKP sensor is located on front cover near crankshaft pulley. Disconnect negative battery cable. Remove serpentine drive belt and A/C compressor if necessary. Raise and support vehicle. Remove splash shields as necessary to access CKP sensor.
  2. Disconnect wiring from CKP sensor. Remove CKP sensor bolt and CKP sensor. To install, reverse removal procedure. Tighten CKP sensor bolt to specification. See TORQUE SPECIFICATIONS . Evacuate and recharge A/C system as necessary.
scientia non olet · About LEMON Manuals