Driver's Side
NOTE:
There are two switches on driver's door panel. One for driver's side window and one for passenger's side window. This test is for both switches on driver's door panel.
Disconnect power window switch harness connector (remove power window switch if necessary). Check continuity between power window switch terminals with switch in appropriate position. See DRIVER'S SIDE POWER WINDOW SWITCH CONTINUITY table. See Fig 1 . If continuity is not as specified, replace power window switch.
DRIVER'S SIDE POWER WINDOW SWITCH CONTINUITY
| Switch Position | Continuity Between Terminals No. |
|---|---|
| Down | 1 & 3; 2 & 7 |
| Neutral | 1, 3 & 7 |
| Up | 1 & 2; 3 & 7 |