LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1998 >> Villager LS >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul 3.0L >> Fuel System (Gasoline Engines) >> CMP Synchronizer >> Removal

CMP Synchronizer: Removal

  1. Position crankshaft to TDC of cylinder No. 1 compression stroke. Note position of electrical connector on CMP sensor.
  2. Place match marks on synchronizer housing and engine. See Figure. Disconnect negative battery cable. Unplug harness connector from CMP sensor. Remove CMP sensor screws and CMP sensor from positioner. Remove synchronizer hold-down bolt and CMP synchronizer.
CAUTION: DO NOT rotate crankshaft while synchronizer is removed from engine.
scientia non olet · About LEMON Manuals