LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1997 >> Tracer GS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Drive Cycles >> Secondary Air Monitor Repair Verification Drive Cycle

Secondary Air Monitor Repair Verification Drive Cycle

  1. Refer to and complete the vehicle check and preparation before initiating the following repair verification steps. See VEHICLE CHECK/PREPARATION .
  2. Start the engine and proceed through the entire OBD II drive cycle until the secondary air monitor shows the ON-BOARD READINESS menu completion status on the scan tool.
  3. If the entire OBD II drive cycle has been performed and the secondary air monitor check has not completed, rerun quick test. See QUICK TEST .
scientia non olet · About LEMON Manuals