Power Window Motor: Installation

Position motor to regulator and install screws. Do not tighten. Connect wiring and check glass to ensure gear engagement. After gears engage, tighten 3 attaching nuts to 50-80 INCH lbs. (5.6-9.6 N.m). To complete installation, reverse removal procedure.

Position motor to regulator and install screws. Do not tighten. Connect wiring and check glass to ensure gear engagement. After gears engage, tighten 2 attaching nuts to 50-80 INCH lbs. (5.6-9.6 N.m). To complete installation, reverse removal procedure.