LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1996 >> Villager LS >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul 3.0L >> Ignition System >> Distributor >> Installation

Ignition System: Distributor: Installation

  1. Ensure engine is at TDC of compression stroke. Rotate distributor rotor so reference marks nearly align. Insert distributor drive into engine.
  2. When installing distributor, rotor will rotate. Ensure reference marks are aligned when distributor is fully engaged in engine. To complete installation, reverse removal procedure. Set base ignition timing. See the ADJUSTMENTS article.
NOTE: Overhaul is not recommended on distributor. Replace as a unit if necessary.
scientia non olet · About LEMON Manuals