LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1996 >> Villager LS >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Anti-Lock Brake System >> Pinpoint Test B >> Brake On/Off Switch >> Check Wire Between Brake On/Off Switch & ABS Control Module

Check Wire Between Brake On/Off Switch & ABS Control Module

  1. With ignition switch in OFF position, connect breakout box with adapter to ABS control module connector. Leave ABS control module disconnected.
  2. Depress brake pedal and measure voltage on breakout box pin No. 2. If reading is greater than 10 volts, ABS is okay. If reading is less than 10 volts, service Yellow wire between brake on/off switch and ABS control module.
scientia non olet · About LEMON Manuals