LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1996 >> Tracer LTS, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Basic Engine Testing - 1.8L >> Ignition Checks >> Engine Controls - Basic Engine Testing - 1.8L >> Check SPOUT Signal

Check SPOUT Signal

Turn ignition off. Disconnect ignition control module. Connect a test light to battery positive terminal and probe the SPOUT circuit at ignition control module. Crank engine. If test light does not flash, go to next step. If test light flashes when engine is cranking, replace ignition control module.

scientia non olet · About LEMON Manuals