LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1995 >> Villager LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnosis >> Pinpoint Test D15 >> Check For Shorts Between ABS Control Module & Solenoids

Check For Shorts Between ABS Control Module & Solenoids

  1. Connect breakout box with adapter to ABS control module connector. Leave ABS control module disconnected. Disconnect hydraulic actuator assembly connector.
  2. Measure resistance of wires between ground and breakout box pins No. 51 (Green/Orange), 32 (Green/White), 8 (Green/Red), and 6 (Yellow/Purple).
  3. If resistances are more than 10,000 ohms, replace hydraulic actuator assembly. If resistances are less than 10,000 ohms, service wire(s) in question between ABS control module and hydraulic actuator assembly.
scientia non olet · About LEMON Manuals