Lumbar/Bolster Support
- Turn the key OFF.
- Disconnect the lumbar support switch connector.
- Measure the resistance between the terminals of the lumbar support switch connector as indicated. LUMBAR/BOLSTER SUPPORT SWITCH TEST .
- If the resistances are not as specified, replace the lumbar support switch. Otherwise, return to the SYMPTOM INDEX .
LUMBAR/BOLSTER SUPPORT SWITCH TEST
| Switch Position | Resistance (Ohms) |
|---|---|
| Fill | Less Than 5 |
| Neutral | Greater Than 10,000 |
| Release | Greater Than 10,000 |