LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1994 >> Villager LS >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Lubrication >> Checking Fluid Level

Checking Fluid Level

  1. With vehicle on level surface, operate vehicle until engine and transmission are at normal operating temperature. Apply parking brake. With engine idling, shift transmission through all gear ranges, ending in Park.
  2. Check transmission fluid level. Fluid level should be between HOT marks, or within crosshatched area on dipstick. Add fluid through filler tube as needed. DO NOT overfill.
CAUTION: DO NOT drive vehicle if fluid level is below bottom hole on dipstick and outside temperature is greater than 50°F (10°C).
scientia non olet · About LEMON Manuals