Power Mirror Motor
- Turn the ignition key to the OFF position.
- Disconnect the left hand and/or right hand power mirror motor connector.
- Using a jumper, connect the terminal No. 3 of the power outside rear view mirror to the battery positive. See Fig 1
. Connect another jumper wire to a good ground. Keeping battery power on terminal No. 3, connect ground wire to terminals No. 1 and No. 2 with switch in specified direction. SeeTERMINAL TESTING
table.
TERMINAL TESTING
| Terminal |
Power Outside Rear View Mirror Direction |
| 1 |
Down |
| 2 |
Left |
| 1 |
Up |
| 2 |
Right |
- If the power outside rear view mirror does not operate as specified, replace the power outside rear view mirror in question. Otherwise, See PINPOINT TEST
.
Courtesy of FORD MOTOR CO.