LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 451 (Electronic Control Modules (Service Information)) >> Module-Heated Seats >> Installation

Module-Heated Seats: Installation

WARNING: This page is about a different car, the 2005 Dodge Pickup and 2005 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the heated seat module under the front seat.
  2. Connect the seat wire harness connector on the connector receptacle on the back of the heated seat module.
  3. Working under the driver front seat, install the heated seat module retaining screws.
  4. Re-position the driver seat.
scientia non olet · About LEMON Manuals