LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 401 (Door System - Sliding) >> Outside Handle >> Installation

Outside Handle: Installation

WARNING: This page is about a different car, the 2004 Dodge Grand Caravan, 2004 Dodge Caravan, and 2004 Chrysler Town & Country. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position outside door handle on vehicle.
  2. Install nuts attaching outside door handle to outer door panel.
  3. Engage clip attaching linkage to outside door handle.
  4. Engage rigging cam to latch/lock control mechanism.
  5. Move clip on latch/lock control to bottom of slot and engage linkage to latch/lock control.
  6. Verify sliding door operation. Adjust as necessary.
  7. Place the watershield into position and press securely to adhesive making sure to properly route wiring and linkages.
  8. Install sliding door stop bumper. (Refer to STOP BUMPER  )
  9. Install sliding door trim panel. (Refer to TRIM PANEL  )
scientia non olet · About LEMON Manuals