LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 318 (Controls) >> Blower Motor Resistor Block >> Installation

Blower Motor Resistor Block: Installation

WARNING: This page is about a different car, the 2004 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the wire harness connector to the blower motor resistor block.
  2. Install the blower motor resistor into the ventilation housing. The housing is indexed to allow mounting in only one position.
  3. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals