LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 318 (Controls) >> Ambient Temperature Sensor >> Removal

Ambient Temperature Sensor: Removal

WARNING: This page is about a different car, the 2004 Dodge Sprinter. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the front license plate bracket (Refer to LICENSE PLATE BRACKET ).
  3. Remove the ambient temperature sensor from the front fascia through the access hole in the fascia (Fig 1 ).
  4. Disconnect the wire harness connector from the sensor and remove the sensor from the vehicle.
    Fig 1: Locating Ambient Temperature Sensor
    G03566167Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals