Pl3: Check For Power Short To Ground
- Locate and disconnect the interior fuse panel connector.
- Disconnect the power door lock switch.
- Disconnect the power door lock relay.
- Measure the resistance between the (Dark Blue/Red), (Dark Green/Orange) and (Dark Green/Red) wires at the power door lock switch connector and ground. See WIRING DIAGRAMS .
- Measure the resistance between the (Dark Green/Orange) wire at the interior fuse panel connector and ground. See WIRING DIAGRAMS .
- Is the resistance greater than 10,000 ohms? If yes, replace the power door lock relay. If no, service the circuit in question for short to ground.