LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1993 >> Capri Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Vane Airflow (VAF) Meter >> Removal

Vane Airflow (VAF) Meter: Removal

  1. On Capri, disconnect primary and secondary wires from coil. On all, disconnect VAF wire harness connector. Remove air duct.
  2. Remove air cleaner cover. Remove attaching bolt and nuts. Remove vane airflow meter. Installation  To install, reverse removal procedure. Position NEW gasket over VAF mounting studs. Tighten bolts and nuts to specification. See TORQUE SPECIFICATIONS.
NOTE: For all on-vehicle adjustments not covered in this article, see ADJUSTMENTS article in the ENGINE PERFORMANCE section.
scientia non olet · About LEMON Manuals