LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1992 >> Cougar LS, 5.0 T >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Removal & Installation >> Bracket & Run Assembly >> Installation

Bracket & Run Assembly: Installation

  1. Install retainer assembly by first aligning upper end to door frame bracket at door belt so that upward pressure applied to retainer assembly will cause it to slip onto joint.
  2. Align lower bracket of retainer assembly to door inner panel and install screw and washer assembly. Tighten screw and washer assembly to 7-14 N. m (6-10 Ft. Lbs.).
  3. Install two electrical wire clips.
  4. Cycle glass to check for proper operation.
  5. Install door trim panel and watershield. See DOOR TRIM  .
scientia non olet · About LEMON Manuals