LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1991 >> Tracer LTS, Automatic >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater System >> Adjustments >> Function Control Cable

Function Control Cable

  1. Move function control lever to defrost position. Insert Cable Locating Key (E7GH-18C408-A) through function cam key slot and heater case key boss opening to secure cam in proper position. See Fig 1 .
  2. Remove trim panel under glove box. Disconnect cable from retaining clip next to function selector cam. Ensure lever is fully in defrost position, and reconnect cable to retaining clip. Remove locating key. Ensure lever operates through its full range of travel on control panel. Install trim panel.
    Fig 1: Adjusting Function Select Cable
    G92C15505Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals