2.5L TBI Fuel Assembly R & I, & Overhaul: Disassembly

1. Turn fuel charging assembly over and remove 4 retaining screws attaching throttle body to main body. Separate throttle body from main body and set aside. Remove and discard gasket.
2. If scraping is necessary, be careful not to damage gasket surface. Remove fuel pressure regulator and fuel injector. Remove filter screen and collar. Remove fuel fittings and filter screen from fuel inlet channel. See Fig 1 .

Fig 1: Exploded View of Fuel Charging Assembly (2.5L)

Courtesy of FORD MOTOR CO.