LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1990 >> Cougar LS >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator - Models W/Internal Fan >> Testing (On-Vehicle) >> No-Load Test

No-Load Test

  1. Attach tachometer to engine. Start engine and operate at 1500 RPM with no electrical load (foot off brake and doors closed).
  2. Voltmeter reading should be taken when needle stops moving. This may require a few minutes. Voltmeter reading should increase 2.0 volts greater than battery voltage.
  3. If voltage increases properly, proceed to LOAD TEST. If voltage increases greater than 2.0 volts, proceed to HIGH VOLTAGE TEST. If there is no voltage increase, proceed to REGULATOR "A" & "I" CIRCUIT TEST.
scientia non olet · About LEMON Manuals