LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1987 >> Lynx XR3 >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - 4-CYL Diesel >> Removal & Installation >> Injectors >> Installation

Removal & Installation: Injectors: Installation

  1. Clean outside of injectors. Position new sealing gaskets with Red painted surface facing up. Position new copper washers in injector bores. Tighten to 44-51 ft. lbs. (60-70 N.m).
  2. Reverse removal procedure to complete installation. Run engine and check for fuel leaks.
scientia non olet · About LEMON Manuals