LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1987 >> Cougar XR7 >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Anti-Lock Brake System) >> Bleeding Brake System >> Pressure Bleeding >> Front

Pressure Bleeding: Front

WARNING: This page does not describe the selected car, but rather 17 other vehicles, including the 1992 Mercury Cougar, 1992 Lincoln Mark VII, 1992 Ford Thunderbird, 1991 Mercury Cougar, and 1991 Lincoln Mark VII. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean reservoir cap area. Attach Pressure Bleeder (104-00064). Maintain system pressure of 35 psi (2.46 kg/cm2 ). Remove dust cap from right front wheel bleeder fitting. Attach tight fitting hose to bleeder fitting. Submerge other end of hose in container of clean brake fluid.
  2. Turn ignition switch to OFF position. With brake pedal released, open bleeder fitting for 10 seconds at a time until no more air bubbles emerge from submerged end of hose. Repeat procedure on left front wheel. When complete, go to rear brake bleeding procedure.
scientia non olet · About LEMON Manuals