LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1983 >> Zephyr Base, 3.3 X >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustment >> Shift Linkage >> Floor Shift

Floor Shift

  1. Move selector lever rearward against stop in "DRIVE" position. Loosen manual lever-to-control cable (or rod) retaining nut.
  2. Move transmission manual lever to drive position (3rd detent from rear of transmission on 4.2L engine models, 2nd detent from rear on others).
  3. Hold selector against rear of "DRIVE" position and tighten retaining nut. Check for normal operation in all selected positions.
Fig 1: Floor Shift Linkage Adjustment
G35250
scientia non olet · About LEMON Manuals