LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1983 >> LN7 Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustment >> Shift Linkage >> Column Shift

Column Shift

  1. Place selector in "DRIVE", or "DRIVE" (Overdrive) position and apply downward force on end of selector lever to keep lever against "DRIVE" stop during adjustment.
  2. Loosen shift rod adjusting bolt and push rod downward to lowest position, then pull up 2 detents. Tighten bolt and check operation in all selector detent positions.
scientia non olet · About LEMON Manuals