LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1982 >> Zephyr Base, 4.2L Eng VIN D >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> MOTORCRAFT Model 7200 VV 2-Barrel >> Adjustments >> Automatic Choke

Automatic Choke

NOTE: Choke cap is retained with tamper-proof screws. To remove choke cap, see procedure under OVERHAUL  in this article.
  1. Apply 1/2" bead of epoxy sealer to each side of choke cover gasket, next to 3 screw bosses. Install gasket and choke cover with new break-away screws.
  2. Rotate cover assembly in "Rich" or "Lean" direction to align notch on choke cover with notch on choke housing. Tighten break-away screws until heads break off.
    NOTE: Ensure that bi-metal spring tab is engaged in slotted choke shaft lever.
scientia non olet · About LEMON Manuals