Rear Wheels
- Set each rear wheel the same amount to prevent dog tracking Sight along the outer side walls of the rear tires, along the horizontal centerline of the wheel Observe where the line intersects on the front tire.
- Measure the sighted line by placing a ruler at the bottom of the front tires using 1 of the same treads on each front tires Difference between the lift and right measurement at the front tires should not exceed 1 inch.
TIGHTENING SPECIFICATIONS
| Application | Ft Lbs (N-m) | |
|---|---|---|
| Rear Wheel Drive | ||
| Shaft-to-Frame Bolts | 120-140 (162-190) | |
| Tie Rod Sleeve Clamp Bolts | 20-22 (27-30) | |
| Front Wheel Drive | ||
| Tie Rod End-to-Steering Knuckle | 23-35 (31-47) | |
| Rear Tie Rod Bolt | 90-100(122-135) | |