LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1982 >> LN7 Automatic Trans >> Repair and Diagnosis >> Electrical >> Body Electrical >> Cruise Control Systems >> Removal & Installation >> Servo Assembly >> Removal (All Models)

Removal (All Models)

  1. Remove air cleaner. On Escort/Lynx models, remove push pin and disconnect speed control actuator cable from accelerator cable bracket. On all other models, remove retaining clip from actuator cable or bead chain.
  2. On all models, disconnect actuator cable from accelerator cable. Remove vacuum and electrical connections from servo. Remove servo mounting bracket screws. Carefully remove servo and cable assembly.
  3. Remove 2 nuts holding cable cover to servo, pull off cover and remove cable or bead chain assembly. Remove servo.
scientia non olet · About LEMON Manuals