Description & Operation

Two wiper systems are available. One is a standard high/low speed wiper system, the other is a high/low/intermittent system. All systems use a 2-speed permanent magnet motor with a brush end plate at one end and a gear housing on the other. The park switch is located in the gear cover and the park mechanism is located in the output arm. Wiper switch is located on steering column, and power is supplied by a circuit breaker in fuse panel.

Intermittent operation is controlled by a variable resistor in the switch and an electronic governor. The pause duration can be from 2 to 12 seconds and is controlled by rotating pause control knob at the end of the lever. Washer switch is integral with wiper switch and is activated by pulling lever toward driver.