HOLLEY Model 6500 2-Barrel: Overhaul: Reassembly
Reassemble carburetor in reverse order of disassembly, noting the following:
- Use new gaskets and seals. Make sure that new gaskets fit correctly and that all holes and slots are punched through and correctly located.
- Reinstall main jets, bleed jets, main well emulsion tubes and idle jets in proper locations. Install power valve diaphragm, aligning 3 screw holes in diaphragm, body and cover. Hold stem and spring compressed against fuel bowl cover while installing and tightening screws.
CARBURETOR ADJUSTMENT SPECIFICATIONS
| Application | Float Level Setting | Float Drop Setting | Fast Idle Cam Setting | Choke Vacuum Kick Setting | Choke Unloader Setting | Auto. Choke Setting |
|---|---|---|---|---|---|---|
| Ford Motor Co. | ||||||
| E1DE-DA | .41-.51" | 1.00" | .098-.138" | .217.256" | .394" | ..... |
| E1DE-EA | .41-.51" | 1.00" | .098-.138" | .217.256" | .394" | ..... |
| E1ZE-RA | .41-.51" | 1.00" | .098-.138" | .217.256" | .394" | ..... |
| E1ZE-SA | .41-.51" | 1.00" | .098-.138" | .217.256" | .394" | ..... |