LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1979 >> Monarch Base, 4D Sedan, 4.1L Eng VIN L, Standard Trans >> Labor Times >> Other Variant >> Transmission >> Automatic Trans >> Transmission Assembly >> Removal & Installation

Removal & Installation

WARNING: This page is about the Monarch Base, 2D Sedan, 4.1L Eng VIN L, Automatic Trans, which is a different variant/trim than selected.

TRANS ID - C3, C4, C5

Applies ToNoteStandard HoursWarranty HoursSkill Level
In-Line62.41.8C
Combination Procedure: BAND: Remove & Replace:
Front &/or Rear1.3A
Combination Procedure: CONVERTER: Drain & Test:
0.5C
Combination Procedure: OIL PUMP: Remove & Replace:
0.4B
Combination Procedure: OIL PUMP SEAL: Remove & Replace:
0.1B
Combination Procedure: TORQUE CONVERTER: Remove & Replace:
0.1C
Combination Procedure: TRANSMISSION ASSEMBLY: Replace:
0.6C
Combination Procedure: TRANSMISSION CASE: Remove & Replace:
2.8A

TRANS ID - JATCO

Applies ToNoteStandard HoursWarranty HoursSkill Level
2.72.0C
Combination Procedure: CONVERTER: Drain & Test:
0.5C
Combination Procedure: FLYWHEEL: Remove & Replace:
0.2C
Combination Procedure: OIL PUMP SEAL: Remove & Replace:
Front0.4B
Combination Procedure: TRANSMISSION ASSEMBLY: Replace:
0.6C