LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1976 >> Capri II Base, 2.3L Eng, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Ignition System >> MOTORCRAFT DURA-Spark & Solid State Ignition >> Overhaul >> Distributor >> Disassembly

MOTORCRAFT DURA-Spark & Solid State Ignition: Overhaul: Distributor: Disassembly

  1. Remove distributor cap and rotor. Disconnect distributor harness plug. Using 2 screwdrivers, pry armature off of advance plate sleeve and remove roll pin.
  2. Remove wire retaining clip and snap ring securing vacuum advance link to pick-up assembly. Remove pick-up assembly retaining screws and remove assembly from distributor.
  3. Remove vacuum advance arm from pick-up assembly and position it against distributor housing. Remove vacuum advance diaphragm. Remove attaching screws and base plate assembly from distributor.
scientia non olet · About LEMON Manuals