Rear Suspension
- Description & Operation
- General Information
- Basic Knowledge
- Safety Precautions
- Self-Diagnostic System
- Testing & Repair
- Adjust Installed Dimension Of Rear Axle Spring - Ar32.20-D-0031-01TSR
- Remove/Install Front Spring - Ar32.20-D-0200TSR
- Remove/Install Rear Axle Spring - Ar32.20-D-0232TS
- Remove/Install Rear Axle Spring - Ar32.20-D-0232TSS
- Remove/Install Elastomer Bearing Of Rear Axle Spring - Ar32.20-D-0240TS
- Adjust Rear Axle Spring - Ar32.21-D-0232-01TS
- Remove/Install Rear Axle Spring - Ar32.21-D-0232TS
- Remove/Install Compressed-Air Lines - Ar32.22-D-0009TSR
- Remove/Install Supporting Frame For Air Suspension - Ar32.22-D-0010TSR
- Remove/Install Supporting Frame For Air Suspension - Ar32.22-D-0010TSS
- Remove/Install Reinforcement For Air Suspension Frame - Ar32.22-D-0011TSR
- Remove/Install Supporting Frame Strut - Ar32.22-D-0012TSR
- Remove/Install Air Suspension Compressor - Ar32.22-D-2001TSR
- Remove/Install Air Suspension Valve Unit - Ar32.22-D-2015TSR
- Remove/Install Air Suspension Bellows On Rear Axle - Ar32.22-D-2016TSR
- Remove/Install Air Suspension Compressor Relay - Ar32.22-D-2018TSR
- Empty/Fill Air Suspension - Ar32.22-D-2019TSR
- Remove/Install Compressed Air Reservoir - Ar32.22-D-2021TSR
- Deactivate/Activate Air Suspension - Ar32.22-D-6000-02TSR
- Remove/Install Air Suspension Control Unit - Ar32.22-D-6000TSR
- Remove/Install Air Suspension Remote Control - Ar32.22-D-6010TSR
- Check Air Suspension For Leaks - Ar32.22-D-8000TSR
- Calibrate Driving Level - Ar32.22-D-9000TSR
- Remove/Install Front Shock-Absorber Strut - Ar32.25-D-0100TSR
- Remove/Install Rear Shock Absorber - Ar32.25-D-0110TS
- Check Shock Absorbers For Damage - Ar32.25-D-0121-01A
- Check Shock Absorbers For Leaks - Ar32.25-D-0121-02A
- Checking Shock Absorber - Ar32.25-D-0121A
- Remove/Install Level Sensor - Ar32.33-D-0009TSR
- Remove/Install Stabilizer Bar Elastomer Bearing On Front Axle - Ar32.35-D-0312TS
- Remove/Install Front Stabilizer Bar - Ar32.35-D-2050TS
- Remove/Install Front Stabilizer Bar - Ar32.35-D-2050TSX
- Remove/Install Anti-Roll Bar On Rear Axle - Ar32.35-D-2210TS
- Remove/Install Front Stabilizer Bar Linkage - Ar32.35-D-3330TS
- Test & Adjustment Values
- Maintenance
- Removal & Installation
- Converting The Chassis (Code Word: Vs3FAHRBA, VERR. No .: 32 930 82)
- Affected Vehicles: Convert Suspension On VEH. With RUTHMANN STEIGER (R) Package - SM32.00-D-0012-01AAA
- Convert The Chassis Of Vehicles With A RUTHMANN STEIGER (R) Scope - SM32.00-D-0012SGA
- Convert The Chassis Of Vehicles With A RUTHMANN STEIGER (R) Scope - SM32.00-D-0012SGB
- Convert The Chassis Of Vehicles With A RUTHMANN STEIGER (R) Scope - SM32.00-D-0012SGC
- Replace Supports For Rear Axle Springs (Code: Vs3LEFSPRI, Acc. No.: 32 910 97) - SM32.20-D-0047SG
- Affected Vehicles: Retrofit Cross Strut On Cross Bridge Of Air Suspension (Code: Vs3LUFTFED, Acc. No.: 31 920 63) - SM32.22-D-0023-01AAA
- Retrofit Cross Strut On Air Suspension Cross Bridge (Code: Vs3LUFTFED, Acc. No.: 31 920 63) - SM32.22-D-0023SG
- Affected Vehicles: Check Air Suspension (Code: Vs3SILUF, Acc. No.: 32 941 57) - SM32.22-D-0025-01AAA
- Check Air Suspension (Code: Vs3SILUF, Acc. No.: 32 941 57) - SM32.22-D-0025SG
- Affected Vehicles: Retrofit Stabilizer Bar To Front Axle (Code: Vs3DREHSTA, Acc. No.: 33 900 95) - SM32.35-D-0021-01SG
- Retrofit The Stabilizer On The Front Axle (Code Word: Vs3DREHSTA, VERR. Nr .: 33 900 95) - SM32.35-D-0021SG
- Torque Specifications
- Tightening Torques: Transporters: Suspension - BA32.00-Z-9999FZ
- Rear Axle Spring - BA32.21-N-1000-01A
- Air Suspension - BA32.22-N-1000-03TS
- Front Axle Damper Strut - BA32.25-N-1000-02TSR
- Rear Axle Shock Absorber - BA32.25-N-1000-03TS
- Front Axle Stabilizer Bar - BA32.35-N-1000-02TS
- Rear Axle Stabilizer Bar - BA32.35-N-1000-03TS
- Wiring Diagrams
- Special Tools
- 907 589 02 23 00 Assembly Device - WS32.00-N-0039B
- 907 586 00 23 00 Assembly Device - WS32.00-N-0110B
- 963 589 02 31 00 Assembly Device - WS32.00-N-3006B
- 387 589 03 63 00 IMPACTOR - WS32.00-N-3033B
- 000 589 12 28 02 Replacement Knife - WS32.00-N-3046-01D
- 000 589 12 28 00 Knife - WS32.00-N-3046D
- 950 589 00 37 00 Clamping Pliers - WS32.00-N-3061B