Gear For Electric Step Removal And Installation - Ar88.30-D-8506TS

Type 907 

With Code T57 (Electric step loading space sliding door on the right) 

Type 907 

With Code T58 (Electric step in the loading compartment sliding door on the left) 

Caution	Risk of injury  through cuts or scrapes on sharp-edged vehicle parts	Always when working on or in the area of sharp, unburred vehicle parts. Wearing safety gloves. Deburr repair panels.	AS00.00-Z-0017-01A
	Removing, installing
1	Remove connecting rods for electric step from gearwheels (1, 2).		AR88.30-D-8502TS
2	Remove nut (5) and take off washer (6).	Typ 907 Nut gear on electric motor	*BA88.30-N-1006-02TS
3	Remove the gear (2) from the driver (7.1) of the electric motor (7).	Installation:  Align the gear (2) to the driver (7.1). Grease the teeth of the gear (2). Long-term fat	*BR00.45-Z-1001-06A
4	Remove the holder (8) from the upper part of the housing	Expansion:  Do not completely remove the holder (8).
5	Hold screw (10) and remove nut (3).	Type 907 Screw connection gear to holder for electric motor	*BA88.30-N-1005-02TS
6	Remove gear (1) with thrust washer (9).	Installation:  Coat the thrust washer (9) on the contact surface with the gearwheel (1) with grease. Grease the teeth of the gear (1). Long-term.	*BR00.45-Z-1001-06A
7	Install in reverse order.